Frequently Asked Questions:

What is the recommended temperature setting for the freezer and refrigerator compartments in my BEKO LSP3671DW White refrigerator?

The recommended temperature settings for the freezer and refrigerator compartments of your BEKO LSP3671DW white refrigerator are as follows:

- Freezer Compartment: The ideal temperature setting for the freezer is -18°C (0°F). This will ensure that food items remain frozen for longer periods without any ice buildup.

- Refrigerator Compartment: The recommended temperature setting for the refrigerator compartment should be between 2°C and 5°C (36°F to 41°F). This temperature range helps maintain proper preservation of fresh food items while also preventing bacterial growth.

Please note that these are general recommendations based on average room temperatures. Factors such as local climate, door opening frequency, and food storage habits may require adjustments to these settings for optimal performance.

What is the correct way to reset the Beko LSP3671DW White refrigerator in case it isn't cooling properly or if there are issues with the digital display?

To reset the Beko LSP3671DW White refrigerator, follow these steps:
1. Unplug the refrigerator from the power source for at least 2 minutes to ensure that it is completely disconnected. Press and hold the "Freeze" button on the control panel of the refrigerator for about 5 seconds until the display flashes. Release the "Freeze" button and wait for the display to turn off completely before plugging the refrigerator back in. Once the refrigerator is plugged in, press and hold the "Freeze" button again for about 5 seconds until the display flashes again. Release the "Freeze" button and wait for the display to turn off completely before using the refrigerator normally. Note: This reset process will not delete any saved settings or user preferences in the refrigerator's memory.

"How do I defrost the freezer compartment on my Beko LSP3671DW White refrigerator?"

To defrost the freezer compartment on your Beko LSP3671DW White refrigerator, follow these steps:

1. Turn off the refrigerator at the wall outlet to prevent any further ice buildup during the defrosting process. Open the door of the freezer compartment and allow it to come up to room temperature. This typically takes several hours, depending on the ambient temperature in your home. Once the compartment has reached room temperature, remove all food items from inside. Use a soft-bristled brush or cloth to gently sweep away any loose ice buildup from the walls and floor of the freezer compartment. Be careful not to damage the interior lining or drainage channels. Use a container or tray to catch any water that may drip as the ice melts. Allow the interior of the freezer compartment to fully dry out before turning the refrigerator back on and placing your food items back inside. If you notice recurring ice buildup, it could be a sign of an issue with the defrost heater or drainage system. Consult the user manual for further troubleshooting steps or contact Beko customer support for assistance.

"How do I properly defrost my Beko LSP3671DW White refrigerator and prevent ice buildup in the future?"

To properly defrost your Beko LSP3671DW White refrigerator, follow these steps:

1. Turn off the power supply to the refrigerator at the circuit breaker or by unplugging it from the wall outlet. Remove all food items and contents from the refrigerator. Locate the defrost drain in the back of the refrigerator, which is usually located near the bottom of the unit. Make sure the drain is clear of any debris. Place a shallow pan or container under the drain to catch any excess water that may come out during the defrosting process. Wait for 2-3 hours for the ice to completely melt and drain out of the refrigerator. This may take longer depending on the thickness of the ice buildup. Use a soft cloth or brush to gently remove any remaining ice from the walls, shelves, and door seals. Be careful not to scratch the surfaces. Clean the interior of the refrigerator with warm water and mild detergent to remove any dirt or grime that may have accumulated during the defrosting process. Dry the interior thoroughly with a clean towel or cloth to prevent any moisture from remaining in the unit. Turn on the power supply to the refrigerator and allow it to run for 2-3 hours to ensure all excess moisture has evaporated. Place food items back into the refrigerator once it has reached the desired temperature. To prevent ice buildup in the future, follow these tips:

1. Keep the door seals clean and free of debris to prevent any air leaks that can cause excess moisture to form inside the unit. Regularly wipe down the interior of the refrigerator with a damp cloth to remove any dirt or grime that may be contributing to ice buildup. Avoid overloading the refrigerator, as this can restrict airflow and lead to increased humidity levels. Keep the temperature setting in the refrigerator between 1-4°C (34-39°F) to ensure optimal performance and prevent excess moisture from forming. Make sure the refrigerator is placed away from direct sunlight, as this can cause excess heat to build up inside the unit, leading to increased humidity levels. Consider investing in a dehumidifier or desiccant product to help absorb excess moisture inside the refrigerator. Regularly check and clean the defrost drain to ensure it is free of any debris that may be causing ice buildup. Schedule regular maintenance checks on your Beko LSP3671DW White refrigerator to ensure optimal performance and prevent any potential issues with ice buildup or other common problems.

Related products

• 

  Kitchenaid Classic 5KFP1325EWH

  Rated 5.00 out of 5
  $156.99 Add to cart
• 

  Fritel WA 1450

  $42.99 Add to cart
• 

  Tefal RK8121

  Rated 3.00 out of 5
  $190.99 Add to cart